All categories
9i-938/958 Pre Amp & Dual Mono Amplifiers
Number of views:

9i-938/958 Pre Amp & Dual Mono Amplifiers

9i-938/958 is excellent AMP for HiFi with powerful power output capability. it can drive most large speakers. It's sound style is neutral type.
Number of views:
Product description

       The 9i-938/958 Pre Amp & Dual Mono Amplifiers were designed in 2016 to drive large loudspeakers. They have played an important role in all of our exhibits at many hifi shows over the years. They can drive even the most inefficient speakers from any manufacturer with power to spare. 





      9i-938 Pre-Amp consists of discrete components and uses an all balanced circuit topology called "Linear equalization" in which both the inputs and output are fully balanced. 


        9i-938 has two XLR , two RCA input and two sets of XLR outputs.  The volume control uses a combination of MUSES72320 + MUSES02 with a range of  -65db to +5db.  


      The 9i-938 can be operated in direct mode, with both volume and amplifier circuits working.  It can also be operated in buffer mode, where only the volume part works and the amplifier part does not. Which mode is the best depends on the choice of the user.








        The 9i-938 Pre Amp has two modes. The left is the standard mode (Direct) and the right is volume mode (Buffer).  In volume mode the pre-amp circuit is disabled. Just press the Buffer button to switch between these two modes.





 Performance parameters:
THD+N: -98db
Frequency response: 20-20KHz (0.2db)
Gain : -65db ~ +5db
Dimension : 43cm(Width), 10.5cm(height), and 33.5cm(depth)
Net Weight: 12.4kg
GRoss Weight: 14.6kg








        9i-958 monoblocks are capable of high current output in addition to high power output.  There are two amplifiers inside each unit with 250 watts using identical parameters working in bridge mode.  They use a fully symmetrical circuit design with huge transformers rated at 1500W and a power supply using 30,000uF capacitance to drive 12 pairs of high-power transistors.

        Our DSD DACs use the latest advanced technology, but we decided to stick with a well proven traditional design for our 9i-958 power amplifiers. After years of experimentation using the highest quality components we have achieved the absolute best performance. Our long-term commitment to this design has paid off with a fantastic sounding monoblock that will help you extract incredible transparency from your loudspeakers.




 Performance parameters:

Power output :   900W (8 Ohm),  1600W (4 Ohm)
THD+N: -92db
Gain : 35db
Dimension : 47cm(Width), 45cm(height), and 36cm(depth)
Net Weight: 53kg
GRoss Weight: 62kg










This product is only sold in China
9i-810 2X200W
We could not find any corresponding parameters, please add them to the properties table

Copyright © 2022 CEN.GRAND All Rights Reserved.   All Rights Reserved  粤ICP备14028051号   SEO